X-Heat Heated Undergarment Package

The Scubaforce X-Heat heating system is designed to meet the specific requirements of technical diving. Made of lightweight, flexible, washable, and breathable Power Fleece material, the suit keeps the 100% waterproof welded heating pads perfectly in position.
All connectors and bushings are watertight according to IP68 protection. This makes it possible to use the heating vest even when the suit is flooded. By using woven silver threads, the X-Heat heating pads offer maximum mobility and “breakage safety”!
A maximum heating temperature of 111°F directly on the pads ensures pleasant warmth during cold or long dives. Front and back heating at a total of 60 watts.

– This option if you have a SI Tech Inflator Valve currently installed in your drysuit.
Vega inlet valve and heating lead through – the compact combination solution for diving in cold conditions. Both ports can be rotated, which ensures a perfect hose configuration. The inflator button is easy to find and use. There is a standard E / O cord on the outside and the connector for the X-Heat system on the inside.

– This option if you have an Apeks Valve installed in your drysuit.
-The raised Delrin bulkhead allows a 6″ (15.24 cm) E/O to be installed utilizing your existing inflator valve
-Screws in directly under the inflator valve bulkhead (threads need to be cleared)
-Two designs available to fit either Apeks or SiTech inflator valve
-Comes with a push locking connector for attachment to any 12V heated undergarment (if using SANTI heated undergarments with this bulkhead you will need the female push-lock connector)
-Some soldering will need to be completed to install your new valve.